FORD Street Stock Fault Codes

• Check Codes by starting the engine and the turning on the Computer Switch, all of the codes as per Ford Factory are available

• CODE…………………………….SYSTEM/COMPONENT
  10…………………………………separator codes
  11…………………………………system ok
  12…………………………………rpm out of spec
  13…………………………………rpm out of spec
  14…………………………………unstedy pip signal during idle test
  15…………………………………loss of KAM, bad KAM/ROM data
  16…………………………………rpm too low to run fuel test
  21…………………………………ect sensor out of range
  22…………………………………map sensor out of range
  23…………………………………throttle sensor out of range
  24…………………………………atc sensor out of range
  41…………………………………hego sensors lean during fuel test
  42…………………………………hego sensor rich during fuel test
  51…………………………………ect voltage too high
  52…………………………………power steer switch open
  53…………………………………throttle position senors voltage to high
  54…………………………………air charge sensor voltage too high
  55…………………………………internal power to module too low
  58…………………………………faults in the idle tracking switch
• 61…………………………………ect voltage to low
  63…………………………………throttle sensor voltage to low(closed throttle)
  64…………………………………air charge sensor voltage to low
  67…………………………………nds or a/c is on
  68…………………………………faults in the idle tracking switch
  78………………………………….interuption to key power circuit
  85…………………………………canister output circuit failure
  87…………………………………fuel pump relay fault
  99…………………………………idle speed corrections not learn’t